update pages

docs/Build-Instructions.md

@@ -1,30 +1,2 @@
-# New
+# Build the project yourself
 See [README.md](https://github.com/jomjol/AI-on-the-edge-device/blob/master/code/README.md)
-
-# Old
-
-## Build the project yourself
-
-- Download and install VS Code
-  - https://code.visualstudio.com/Download
-- Install the VS Code platform io plugin
-  - <img src="https://raw.githubusercontent.com/jomjol/ai-on-the-edge-device/master/images/platformio_plugin.jpg" width="200" align="middle">
-  - Check for error messages, maybe you need to manually add some python libraries
-    - e.g. in my Ubuntu a python3-env was missing: `sudo apt-get install python3-venv`
-- git clone this project
-  - in Linux: `git clone https://github.com/jomjol/AI-on-the-edge-device.git`
-- in VS code, open the `AI-on-the-edge-device/code` 
-	- from terminal: `cd AI-on-the-edge-device/code && code .`
-- open a pio terminal (click on the terminal sign in the bottom menu bar)
-- make sure you are in the `code` directory
-- To build, type  `platformio run --environment esp32cam`
-  - or use the graphical interface:
-    <img src="https://raw.githubusercontent.com/jomjol/ai-on-the-edge-device/master/images/platformio_build.jpg" width="200" align="middle">
-  - the build artifacts are stored in  `code/.pio/build/esp32cam/`
-- Connect the device and type `pio device monitor`. There you will see your device and can copy the name to the next instruction
-- Add `upload_port = you_device_port` to the `platformio.ini` file
-- make sure an sd card with the contents of the `sd_card` folder is inserted and you have changed the wifi details
-- `pio run --target erase` to erase the flash
-- `pio run --target upload` this will upload the `bootloader.bin, partitions.bin,firmware.bin` from the `code/.pio/build/esp32cam/` folder. 
-- `pio device monitor` to observe the logs via uart
-