Mirror/AI-on-the-edge-device-docs
1
0
Fork 0
mirror of https://github.com/jomjol/AI-on-the-edge-device-docs.git synced 2025-12-07 12:07:01 +03:00
Code Issues Packages Projects Releases Wiki Activity

Update Installation with WebInstaller

Browse Source
This commit is contained in:
jomjol
2023-01-28 09:47:39 +01:00
parent b2dc4be985
commit 55e02a8a87
5 changed files with 64 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

64
docs/Installation.md
View File

@@ -204,3 +204,67 @@ If you update from an version older than 12.0.1, you should firstly update to ve
Now you can safely update to the newest version.
## Update via WebInstaller
### Update from version greater than 12.0.0
If you use the WebInstaller and insert an empty SD-card, the firmware will automatically open a primitive access point to make the initial setup. It is triggered a missing `wlan.ini` or a missing`/config/config.ini`.
##### Using internal access point for sd-card setup
Before starting the flash process, download the necessary file. It is a zip file, containing the initial default configuration. You can identify it by the naming. It is named `AI-on-the-edge-device__remote-setup__*.zip`. Store this file locally as you will need it later, when you are connected to the internal access point (no internet connection).
###### Flash the firmware with the WebInstaller
Instructions see above.
###### Connect to Device
During the first booting, the device detects that the wifi credentials as well as the configuration informations are missing.
Therefore a simple wifi access point is initiated and a simple internal web server is startet, so the device can be setup.
The naming of the wifi is "AI-on-the-edge" and you can access it without any password.
![](img/access-point.png)
You connect to the server with the fixed ip: http://192.168.4.1
###### Upload initial configuration to sd-card
![](img/setup-config.png)
Use the `select file` and `upload` button to start the upload.
A warning will show up if you have choosen a possible wrong file (without default configuration).
###### Upload initial configuration to sd-card
![](img/setup-config.png)
Use the `select file` and `upload` button to start the upload.
A warning will show up if you have choosen a possible wrong file (without default configuration).
Be patient - the upload takes up to around 60s without response during this time!
After succesfull uploading, the page will be reloaded for the next step.
###### Store WLAN acces information
![](img/setup-wlan.png)
Here you can set your wifi credentials. Only basic settings can done here. If you need advanced features (fixed ip, ...), please use the manual setup.
Attention:
- Carefully check your wifi settings. To change them later on, you need to take you the sd-card and to it manually in `wlan.ini`
- The informations are transfered without encryption.
Finish the step by pushing `Write wlan.ini`
###### Reboot
![](img/setup-reboot.png)
The final step is the reboot.
It will take up to 3 minutes. Afterwards you can find your device in the local network. Check you router for the IP. You can find it also in the USB Console output.