migrate parameters (#19)

Co-authored-by: CaCO3 <caco@ruinelli.ch>

param-docs/parameter-pages/TakeImage/Brightness.md

@@ -0,0 +1,8 @@
+# Parameter `Brightness`
+Default Value: `0`
+
+!!! Warning
+    This is an **Expert Parameter**! Only change it if you understand what it does!
+    This parameter can also be set on the Reference Image configuration.
+
+Image Brightness (`-2` .. `2`) 

param-docs/parameter-pages/TakeImage/Contrast.md

@@ -0,0 +1,11 @@
+# Parameter `Contrast`
+Default Value: `0`
+
+!!! Warning
+    This is an **Expert Parameter**! Only change it if you understand what it does!
+    This parameter can also be set on the Reference Image configuration.
+
+Image Contrast (`-2` .. `2`)
+
+!!! Note
+    Camera driver is not fully supporting this setting yet (no impact on image) 

param-docs/parameter-pages/TakeImage/Demo.md

@@ -0,0 +1,6 @@
+# Parameter `Demo`
+Default Value: `false`
+
+Enable to use demo images instead of the real camera images.
+Make sure to have a `/demo` folder on your SD-Card and it contains the expected files!
+Check [here](../Demo-Mode) for details. 

param-docs/parameter-pages/TakeImage/FixedExposure.md

@@ -0,0 +1,9 @@
+# Parameter `FixedExposure`
+Default Value: `false`
+
+!!! Warning
+    This is an **Expert Parameter**! Only change it if you understand what it does!
+
+Fixes the illumination setting of camera at the startup and uses this later -->
+individual round is faster.
+

param-docs/parameter-pages/TakeImage/ImageQuality.md

@@ -0,0 +1,9 @@
+# Parameter `ImageQuality`
+Default Value: `12`
+
+!!! Warning
+    This is an **Expert Parameter**! Only change it if you understand what it does!
+
+Quality index for pictures. `0` (high) .. `63` (low)
+!!! Warning
+    Values below `12` can result in reboots as the image gets larger and might no longer fit in the available RAM!

param-docs/parameter-pages/TakeImage/ImageSize.md

@@ -0,0 +1,11 @@
+# Parameter `ImageSize`
+Default Value: `VGA`
+
+!!! Warning
+    This is an **Expert Parameter**! Only change it if you understand what it does!
+
+Size of the camera picture.
+Available options:
+
+- `VGA` (640 x 480 pixel)
+- `QVGA` (320 x 240 pixel)

param-docs/parameter-pages/TakeImage/LEDIntensity.md

@@ -0,0 +1,8 @@
+# Parameter `LEDIntensity`
+Default Value: `50`
+
+!!! Warning
+    This is an **Expert Parameter**! Only change it if you understand what it does!
+    This parameter can also be set on the Reference Image configuration.
+
+Set the Flash LED Intensity.

param-docs/parameter-pages/TakeImage/RawImagesLocation.md

@@ -0,0 +1,7 @@
+# Parameter `RawImagesLocation`
+Default Value: `/log/source`
+
+Location on the SD-Card to store the raw images for logging.
+
+!!! Warning
+    A SD-Card has limited write cycles. Since the device does not do [Wear Leveling](https://en.wikipedia.org/wiki/Wear_leveling), this can wear out your SD-Card!

param-docs/parameter-pages/TakeImage/RawImagesRetention.md

@@ -0,0 +1,4 @@
+# Parameter `RawImagesRetention`
+Default Value: `15`
+
+Number of days to keep the raw images (`0` = forever)

param-docs/parameter-pages/TakeImage/Saturation.md

@@ -0,0 +1,11 @@
+# Parameter `Saturation`
+Default Value: `0`
+
+!!! Warning
+    This is an **Expert Parameter**! Only change it if you understand what it does!
+    This parameter can also be set on the Reference Image configuration.
+
+Image Saturation (`-2` .. `2`)
+
+!!! Note
+    Camera driver is not fully supporting this setting yet (no impact on image)!

param-docs/parameter-pages/TakeImage/WaitBeforeTakingPicture.md

@@ -0,0 +1,7 @@
+# Parameter `WaitBeforeTakingPicture`
+Default Value: `5`
+
+!!! Warning
+    This is an **Expert Parameter**! Only change it if you understand what it does!
+
+Waiting time between switching illumination on and taking the picture (in seconds)-