From 2eb8f6fb0f8f068dde049079b44cbd6090f312f1 Mon Sep 17 00:00:00 2001 From: CaCO3 Date: Mon, 20 Feb 2023 23:29:45 +0100 Subject: [PATCH] . --- param-docs/parameter-pages/Alignment/AlignmentAlgo.md | 4 ---- param-docs/parameter-pages/Alignment/FlipImageSize.md | 4 ---- param-docs/parameter-pages/Alignment/InitialMirror.md | 4 ---- param-docs/parameter-pages/Alignment/InitialRotate.md | 4 ---- param-docs/parameter-pages/Alignment/SearchFieldX.md | 4 +--- param-docs/parameter-pages/Alignment/SearchFieldY.md | 5 +---- param-docs/parameter-pages/Analog/CNNGoodThreshold.md | 3 --- param-docs/parameter-pages/Analog/ExtendedResolution.md | 1 - param-docs/parameter-pages/Analog/Model.md | 1 - param-docs/parameter-pages/Analog/ROIImagesLocation.md | 3 --- param-docs/parameter-pages/Analog/ROIImagesRetention.md | 1 - param-docs/parameter-pages/AutoTimer/AutoStart.md | 3 --- param-docs/parameter-pages/AutoTimer/Interval.md | 1 - param-docs/parameter-pages/DataLogging/DataFilesRetention.md | 2 -- param-docs/parameter-pages/DataLogging/DataLogActive.md | 2 -- param-docs/parameter-pages/Debug/LogLevel.md | 5 ----- param-docs/parameter-pages/Debug/LogfilesRetention.md | 1 - param-docs/parameter-pages/Digits/CNNGoodThreshold.md | 3 --- param-docs/parameter-pages/Digits/Model.md | 1 - param-docs/parameter-pages/Digits/ROIImagesLocation.md | 2 -- param-docs/parameter-pages/Digits/ROIImagesRetention.md | 2 -- param-docs/parameter-pages/GPIO/IO0.md | 5 ----- param-docs/parameter-pages/GPIO/IO1.md | 5 ----- param-docs/parameter-pages/GPIO/IO12.md | 5 ----- param-docs/parameter-pages/GPIO/IO13.md | 5 ----- param-docs/parameter-pages/GPIO/IO3.md | 5 ----- param-docs/parameter-pages/GPIO/IO4.md | 5 ----- param-docs/parameter-pages/GPIO/LEDColor.md | 1 - param-docs/parameter-pages/GPIO/LEDNumbers.md | 1 - param-docs/parameter-pages/GPIO/LEDType.md | 1 - param-docs/parameter-pages/GPIO/MainTopicMQTT.md | 4 ---- param-docs/parameter-pages/InfluxDB/Database.md | 1 - param-docs/parameter-pages/InfluxDB/Measurement.md | 1 - param-docs/parameter-pages/InfluxDB/Uri.md | 2 -- param-docs/parameter-pages/InfluxDB/password.md | 2 -- param-docs/parameter-pages/InfluxDB/user.md | 3 --- param-docs/parameter-pages/MQTT/ClientID.md | 2 -- param-docs/parameter-pages/MQTT/HomeassistantDiscovery.md | 2 -- param-docs/parameter-pages/MQTT/MainTopic.md | 5 ----- param-docs/parameter-pages/MQTT/MeterType.md | 3 --- param-docs/parameter-pages/MQTT/RetainMessages.md | 2 -- param-docs/parameter-pages/MQTT/Uri.md | 1 - param-docs/parameter-pages/MQTT/password.md | 2 -- param-docs/parameter-pages/MQTT/user.md | 1 - .../parameter-pages/PostProcessing/AllowNegativeRates.md | 1 - .../PostProcessing/CheckDigitIncreaseConsistency.md | 3 --- param-docs/parameter-pages/PostProcessing/ErrorMessage.md | 2 -- .../PostProcessing/NUMBER.AllowNegativeRates.md | 2 -- .../PostProcessing/NUMBER.AnalogDigitalTransitionStart.md | 1 - .../parameter-pages/PostProcessing/NUMBER.DecimalShift.md | 1 - .../PostProcessing/NUMBER.ExtendedResolution.md | 2 -- .../PostProcessing/NUMBER.IgnoreLeadingNaN.md | 3 --- .../parameter-pages/PostProcessing/NUMBER.MaxRateType.md | 1 - .../parameter-pages/PostProcessing/NUMBER.MaxRateValue.md | 2 -- .../parameter-pages/PostProcessing/PreValueAgeStartup.md | 2 -- param-docs/parameter-pages/PostProcessing/PreValueUse.md | 1 - param-docs/parameter-pages/System/Hostname.md | 2 -- param-docs/parameter-pages/System/RSSIThreshold.md | 1 - param-docs/parameter-pages/System/SetupMode.md | 2 -- param-docs/parameter-pages/System/TimeServer.md | 2 -- param-docs/parameter-pages/System/TimeZone.md | 1 - param-docs/parameter-pages/TakeImage/Brightness.md | 2 -- param-docs/parameter-pages/TakeImage/Contrast.md | 3 --- param-docs/parameter-pages/TakeImage/Demo.md | 1 - param-docs/parameter-pages/TakeImage/FixedExposure.md | 3 --- param-docs/parameter-pages/TakeImage/ImageQuality.md | 2 -- param-docs/parameter-pages/TakeImage/ImageSize.md | 3 --- param-docs/parameter-pages/TakeImage/LEDIntensity.md | 2 -- param-docs/parameter-pages/TakeImage/RawImagesLocation.md | 2 -- param-docs/parameter-pages/TakeImage/RawImagesRetention.md | 1 - param-docs/parameter-pages/TakeImage/Saturation.md | 3 --- .../parameter-pages/TakeImage/WaitBeforeTakingPicture.md | 2 -- param-docs/templates/overview.md | 4 ---- param-docs/templates/parameter.md | 3 --- 74 files changed, 2 insertions(+), 178 deletions(-) diff --git a/param-docs/parameter-pages/Alignment/AlignmentAlgo.md b/param-docs/parameter-pages/Alignment/AlignmentAlgo.md index 6620f36..075ad60 100644 --- a/param-docs/parameter-pages/Alignment/AlignmentAlgo.md +++ b/param-docs/parameter-pages/Alignment/AlignmentAlgo.md @@ -1,13 +1,9 @@ # Parameter `AlignmentAlgo` Default Value: `Default` - !!! Warning This is an **Expert Parameter**! Only change it if you understand what it does! - Algorithm used for the alignment step. - Available options: - - `Default`: Use only red color channel - `HighAccuracy`: Use all 3 color Channels (3x slower) - `Fast`: First time use `HighAccuracy`, then only check if the image is shifted diff --git a/param-docs/parameter-pages/Alignment/FlipImageSize.md b/param-docs/parameter-pages/Alignment/FlipImageSize.md index 17b7e1c..1a303bc 100644 --- a/param-docs/parameter-pages/Alignment/FlipImageSize.md +++ b/param-docs/parameter-pages/Alignment/FlipImageSize.md @@ -1,12 +1,8 @@ # Parameter `FlipImageSize` Default Value: `false` - !!! Warning This is an **Expert Parameter**! Only change it if you understand what it does! - !!! Note This parameter is not accessible through the Web Interface Configuration Page! - This parameter can be used to rotate the viewport together with the alignment rotation: - ![](../img/flipImageSize.png) diff --git a/param-docs/parameter-pages/Alignment/InitialMirror.md b/param-docs/parameter-pages/Alignment/InitialMirror.md index d6f3aec..192a372 100644 --- a/param-docs/parameter-pages/Alignment/InitialMirror.md +++ b/param-docs/parameter-pages/Alignment/InitialMirror.md @@ -1,10 +1,6 @@ # Parameter `InitialMirror` Default Value: `false` - - !!! Note This parameter is not accessible through the Web Interface Configuration Page! - Please fill me with an explanation and useful links - diff --git a/param-docs/parameter-pages/Alignment/InitialRotate.md b/param-docs/parameter-pages/Alignment/InitialRotate.md index 32436eb..df7c3ac 100644 --- a/param-docs/parameter-pages/Alignment/InitialRotate.md +++ b/param-docs/parameter-pages/Alignment/InitialRotate.md @@ -1,10 +1,6 @@ # Parameter `InitialRotate` Default Value: `179` - - !!! Note This parameter is not accessible through the Web Interface Configuration Page! - Please fill me with an explanation and useful links - diff --git a/param-docs/parameter-pages/Alignment/SearchFieldX.md b/param-docs/parameter-pages/Alignment/SearchFieldX.md index 310825f..9386f98 100644 --- a/param-docs/parameter-pages/Alignment/SearchFieldX.md +++ b/param-docs/parameter-pages/Alignment/SearchFieldX.md @@ -1,7 +1,5 @@ # Parameter `SearchFieldX` Default Value: `20` - !!! Warning This is an **Expert Parameter**! Only change it if you understand what it does! - -`x` size (width) in which the reference is searched. +X-size (width) in which the reference is searched. diff --git a/param-docs/parameter-pages/Alignment/SearchFieldY.md b/param-docs/parameter-pages/Alignment/SearchFieldY.md index 0e290da..a49484b 100644 --- a/param-docs/parameter-pages/Alignment/SearchFieldY.md +++ b/param-docs/parameter-pages/Alignment/SearchFieldY.md @@ -1,8 +1,5 @@ # Parameter `SearchFieldY` Default Value: `20` - !!! Warning This is an **Expert Parameter**! Only change it if you understand what it does! - -`y` size (height) in which the reference is searched. - +Y-size (height) in which the reference is searched. diff --git a/param-docs/parameter-pages/Analog/CNNGoodThreshold.md b/param-docs/parameter-pages/Analog/CNNGoodThreshold.md index acff4a5..c94091f 100644 --- a/param-docs/parameter-pages/Analog/CNNGoodThreshold.md +++ b/param-docs/parameter-pages/Analog/CNNGoodThreshold.md @@ -1,10 +1,7 @@ # Parameter `CNNGoodThreshold` Default Value: `0.5` - !!! Warning This is an **Expert Parameter**! Only change it if you understand what it does! - Threshold above which the classification should be to accept the value (only meaningful for digits). - !!! Warning This is only supported for the `ana-class100` models! diff --git a/param-docs/parameter-pages/Analog/ExtendedResolution.md b/param-docs/parameter-pages/Analog/ExtendedResolution.md index 7fef77a..b56c505 100644 --- a/param-docs/parameter-pages/Analog/ExtendedResolution.md +++ b/param-docs/parameter-pages/Analog/ExtendedResolution.md @@ -1,5 +1,4 @@ # Parameter `ExtendedResolution` - !!! WARNING This parameter is unused! Use [`NUMBER.ExtendedResolution`](../Parameters/#PostProcessing-NUMBER.ExtendedResolution) instead! diff --git a/param-docs/parameter-pages/Analog/Model.md b/param-docs/parameter-pages/Analog/Model.md index 342fa44..7d2e1a7 100644 --- a/param-docs/parameter-pages/Analog/Model.md +++ b/param-docs/parameter-pages/Analog/Model.md @@ -1,4 +1,3 @@ # Parameter `Model` Default Value: `/config/ana-cont_11.3.1_s2.tflite` - Path to CNN model file for image recognition. See [here](../Choosing-the-Model) for details. diff --git a/param-docs/parameter-pages/Analog/ROIImagesLocation.md b/param-docs/parameter-pages/Analog/ROIImagesLocation.md index e1575ec..994a74b 100644 --- a/param-docs/parameter-pages/Analog/ROIImagesLocation.md +++ b/param-docs/parameter-pages/Analog/ROIImagesLocation.md @@ -1,9 +1,6 @@ # Parameter `ROIImagesLocation` Default Value: `/log/analog` - Location to store separated analog images on the SD-Card for logging. - !!! Warning A SD-Card has limited write cycles. Since the device does not do [Wear Leveling](https://en.wikipedia.org/wiki/Wear_leveling), this can wear out your SD-Card! - diff --git a/param-docs/parameter-pages/Analog/ROIImagesRetention.md b/param-docs/parameter-pages/Analog/ROIImagesRetention.md index e095b09..4cc0cb2 100644 --- a/param-docs/parameter-pages/Analog/ROIImagesRetention.md +++ b/param-docs/parameter-pages/Analog/ROIImagesRetention.md @@ -1,4 +1,3 @@ # Parameter `ROIImagesRetention` Default Value: `3` - Days to keep the separated analog images (`0` = forever). diff --git a/param-docs/parameter-pages/AutoTimer/AutoStart.md b/param-docs/parameter-pages/AutoTimer/AutoStart.md index fff75c8..e6004b2 100644 --- a/param-docs/parameter-pages/AutoTimer/AutoStart.md +++ b/param-docs/parameter-pages/AutoTimer/AutoStart.md @@ -1,11 +1,8 @@ # Parameter `AutoStart` Default Value: `true` - !!! Warning This is an **Expert Parameter**! Only change it if you understand what it does! - Automatically start the Flow (Digitization Rounds) immediately after power up. - !!! Note Typically this is set to `true`. The only reason to set it to `false` is debugging or if you want to trigger it manually using the [REST API](../REST-API) or [MQTT-API](../MQTT-API). \ No newline at end of file diff --git a/param-docs/parameter-pages/AutoTimer/Interval.md b/param-docs/parameter-pages/AutoTimer/Interval.md index b03fd44..26f63f6 100644 --- a/param-docs/parameter-pages/AutoTimer/Interval.md +++ b/param-docs/parameter-pages/AutoTimer/Interval.md @@ -1,5 +1,4 @@ # Parameter `Interval` Default Value: `5` - Interval in minutes in which the Flow (Digitization Round) is run. If a round takes longer than this interval, the next round gets postponed until the current round completes. diff --git a/param-docs/parameter-pages/DataLogging/DataFilesRetention.md b/param-docs/parameter-pages/DataLogging/DataFilesRetention.md index 683ce2b..13fb110 100644 --- a/param-docs/parameter-pages/DataLogging/DataFilesRetention.md +++ b/param-docs/parameter-pages/DataLogging/DataFilesRetention.md @@ -2,6 +2,4 @@ Default Value: `3` - - Number of days to keep the data files (`0` = forever). diff --git a/param-docs/parameter-pages/DataLogging/DataLogActive.md b/param-docs/parameter-pages/DataLogging/DataLogActive.md index 85e9da1..62e4e97 100644 --- a/param-docs/parameter-pages/DataLogging/DataLogActive.md +++ b/param-docs/parameter-pages/DataLogging/DataLogActive.md @@ -1,7 +1,5 @@ # Parameter `DataLogActive` Default Value: `true` - Activate data logging to SD-Card. - !!! Warning A SD-Card has limited write cycles. Since the device does not do [Wear Leveling](https://en.wikipedia.org/wiki/Wear_leveling), this can wear out your SD-Card! \ No newline at end of file diff --git a/param-docs/parameter-pages/Debug/LogLevel.md b/param-docs/parameter-pages/Debug/LogLevel.md index cf55284..e505299 100644 --- a/param-docs/parameter-pages/Debug/LogLevel.md +++ b/param-docs/parameter-pages/Debug/LogLevel.md @@ -1,17 +1,12 @@ # Parameter `LogLevel` Default Value: `1` (`ERROR`) - Define the log level for the logging to the SD-Card. - Available options: - - `1`: `ERROR` - `2`: `WARNING` - `3`: `INFO` - `4`: `DEBUG` - As higher the level, as more log messages get written to the SD-Card. - !!! Warning `DEBUG` or `INFO` might damage the SD-Card if enabled long term due to excessive writes to the SD-Card! A SD-Card has limited write cycles. Since the device does not do [Wear Leveling](https://en.wikipedia.org/wiki/Wear_leveling), this can wear out your SD-Card! \ No newline at end of file diff --git a/param-docs/parameter-pages/Debug/LogfilesRetention.md b/param-docs/parameter-pages/Debug/LogfilesRetention.md index 52efcc1..06b0839 100644 --- a/param-docs/parameter-pages/Debug/LogfilesRetention.md +++ b/param-docs/parameter-pages/Debug/LogfilesRetention.md @@ -1,4 +1,3 @@ # Parameter `LogfilesRetention` Default Value: `3` - Number of days to keep the log files (`0` = forever). diff --git a/param-docs/parameter-pages/Digits/CNNGoodThreshold.md b/param-docs/parameter-pages/Digits/CNNGoodThreshold.md index 0485129..e75fc2f 100644 --- a/param-docs/parameter-pages/Digits/CNNGoodThreshold.md +++ b/param-docs/parameter-pages/Digits/CNNGoodThreshold.md @@ -1,10 +1,7 @@ # Parameter `CNNGoodThreshold` Default Value: `0.5` - !!! Warning This is an **Expert Parameter**! Only change it if you understand what it does! - Threshold above which the classification should be to accept the value (only meaningful for digits). - !!! Warning This is only supported for the `dig-class100` models! diff --git a/param-docs/parameter-pages/Digits/Model.md b/param-docs/parameter-pages/Digits/Model.md index bc066c1..6b6445e 100644 --- a/param-docs/parameter-pages/Digits/Model.md +++ b/param-docs/parameter-pages/Digits/Model.md @@ -1,4 +1,3 @@ # Parameter `Model` Default Value: `/config/dig-cont_0600_s3.tflite` - Path to CNN model file for image recognition. See [here](../Choosing-the-Model) for details. diff --git a/param-docs/parameter-pages/Digits/ROIImagesLocation.md b/param-docs/parameter-pages/Digits/ROIImagesLocation.md index a0150c7..0732350 100644 --- a/param-docs/parameter-pages/Digits/ROIImagesLocation.md +++ b/param-docs/parameter-pages/Digits/ROIImagesLocation.md @@ -1,7 +1,5 @@ # Parameter `ROIImagesLocation` Default Value: `/log/digit` - Location to store separated digit images on the SD-Card for logging. - !!! Warning A SD-Card has limited write cycles. Since the device does not do [Wear Leveling](https://en.wikipedia.org/wiki/Wear_leveling), this can wear out your SD-Card! diff --git a/param-docs/parameter-pages/Digits/ROIImagesRetention.md b/param-docs/parameter-pages/Digits/ROIImagesRetention.md index 513b3ab..16e8064 100644 --- a/param-docs/parameter-pages/Digits/ROIImagesRetention.md +++ b/param-docs/parameter-pages/Digits/ROIImagesRetention.md @@ -1,5 +1,3 @@ # Parameter `ROIImagesRetention` Default Value: `3` - Days to keep the separated digit images (`0` = forever). - diff --git a/param-docs/parameter-pages/GPIO/IO0.md b/param-docs/parameter-pages/GPIO/IO0.md index a9b180a..970a7ba 100644 --- a/param-docs/parameter-pages/GPIO/IO0.md +++ b/param-docs/parameter-pages/GPIO/IO0.md @@ -1,18 +1,13 @@ # Parameter `IO0` Default Value: `input disabled 10 false false` - !!! Warning This is an **Expert Parameter**! Only change it if you understand what it does! - This parameter can be used to configure the GPIO `IO0` pin. - !!! Warning This pin is only usable with restrictions! It must be disabled when the camera is used. Additionally, it is used to activate Bootloader mode and must therefore be HIGH after a reset! - Parameters: - - `GPIO 0 state`: One of `input`, `input pullup`, `input pulldown` or `output`. - `GPIO 0 use interrupt`: Enable interrupt trigger - `GPIO 0 PWM duty resolution`: LEDC PWM duty resolution in bit diff --git a/param-docs/parameter-pages/GPIO/IO1.md b/param-docs/parameter-pages/GPIO/IO1.md index 481a847..daf1a38 100644 --- a/param-docs/parameter-pages/GPIO/IO1.md +++ b/param-docs/parameter-pages/GPIO/IO1.md @@ -1,16 +1,11 @@ # Parameter `IO1` Default Value: `input disabled 10 false false` - !!! Warning This is an **Expert Parameter**! Only change it if you understand what it does! - This parameter can be used to configure the GPIO `IO1` pin. - !!! Warning This pin is by default used for the serial communication as TX pin (USB logging)! - Parameters: - - `GPIO 1 state`: One of `input`, `input pullup`, `input pulldown` or `output`. - `GPIO 1 use interrupt`: Enable interrupt trigger - `GPIO 1 PWM duty resolution`: LEDC PWM duty resolution in bit diff --git a/param-docs/parameter-pages/GPIO/IO12.md b/param-docs/parameter-pages/GPIO/IO12.md index f5f62b8..aae89c2 100644 --- a/param-docs/parameter-pages/GPIO/IO12.md +++ b/param-docs/parameter-pages/GPIO/IO12.md @@ -1,16 +1,11 @@ # Parameter `IO12` Default Value: `input-pullup disabled 10 false false` - !!! Warning This is an **Expert Parameter**! Only change it if you understand what it does! - This parameter can be used to configure the GPIO `IO12` pin. - !!! Note This pin is usable without known restrictions! - Parameters: - - `GPIO 12 state`: One of `external-flash-ws281x`, `input`, `input pullup`, `input pulldown` or `output`. - `GPIO 12 use interrupt`: Enable interrupt trigger - `GPIO 12 PWM duty resolution`: LEDC PWM duty resolution in bit diff --git a/param-docs/parameter-pages/GPIO/IO13.md b/param-docs/parameter-pages/GPIO/IO13.md index 64bd642..f77c57a 100644 --- a/param-docs/parameter-pages/GPIO/IO13.md +++ b/param-docs/parameter-pages/GPIO/IO13.md @@ -1,16 +1,11 @@ # Parameter `IO13` Default Value: `input-pullup disabled 10 false false` - !!! Warning This is an **Expert Parameter**! Only change it if you understand what it does! - This parameter can be used to configure the GPIO `IO13` pin. - !!! Note This pin is usable without known restrictions! - Parameters: - - `GPIO 13 state`: One of `input`, `input pullup`, `input pulldown` or `output`. - `GPIO 13 use interrupt`: Enable interrupt trigger - `GPIO 13 PWM duty resolution`: LEDC PWM duty resolution in bit diff --git a/param-docs/parameter-pages/GPIO/IO3.md b/param-docs/parameter-pages/GPIO/IO3.md index 7d00209..87b8597 100644 --- a/param-docs/parameter-pages/GPIO/IO3.md +++ b/param-docs/parameter-pages/GPIO/IO3.md @@ -1,16 +1,11 @@ # Parameter `IO3` Default Value: `input disabled 10 false false` - !!! Warning This is an **Expert Parameter**! Only change it if you understand what it does! - This parameter can be used to configure the GPIO `IO3` pin. - !!! Warning This pin is by default used for the serial communication as RX pin (USB logging)! - Parameters: - - `GPIO 3 state`: One of `input`, `input pullup`, `input pulldown` or `output`. - `GPIO 3 use interrupt`: Enable interrupt trigger - `GPIO 3 PWM duty resolution`: LEDC PWM duty resolution in bit diff --git a/param-docs/parameter-pages/GPIO/IO4.md b/param-docs/parameter-pages/GPIO/IO4.md index f59883d..f756132 100644 --- a/param-docs/parameter-pages/GPIO/IO4.md +++ b/param-docs/parameter-pages/GPIO/IO4.md @@ -1,17 +1,12 @@ # Parameter `IO4` Default Value: `built-in-led disabled 10 false false` - !!! Warning This is an **Expert Parameter**! Only change it if you understand what it does! - This parameter can be used to configure the GPIO `IO4` pin. - !!! Warning This pin is only usable with restrictions! By default, it is used for build-in flash light (onboard LED). - Parameters: - - `GPIO 4 state`: One of `built-in-led`, `input`, `input pullup`, `input pulldown` or `output`. - `GPIO 4 use interrupt`: Enable interrupt trigger - `GPIO 4 PWM duty resolution`: LEDC PWM duty resolution in bit diff --git a/param-docs/parameter-pages/GPIO/LEDColor.md b/param-docs/parameter-pages/GPIO/LEDColor.md index ea76aac..76d025e 100644 --- a/param-docs/parameter-pages/GPIO/LEDColor.md +++ b/param-docs/parameter-pages/GPIO/LEDColor.md @@ -1,5 +1,4 @@ # Parameter `LEDColor` Default Value: `150 150 150` - Color of the attached LEDs to GPIO12 in (R)ed, (G)reen (B)lue from `0` (full off) .. `255` (full on). (See `IO12` parameter). diff --git a/param-docs/parameter-pages/GPIO/LEDNumbers.md b/param-docs/parameter-pages/GPIO/LEDNumbers.md index b151b24..e0f505f 100644 --- a/param-docs/parameter-pages/GPIO/LEDNumbers.md +++ b/param-docs/parameter-pages/GPIO/LEDNumbers.md @@ -1,4 +1,3 @@ # Parameter `LEDNumbers` Default Value: `2` - Number of LEDs on the external LED-stripe attached to GPIO12 (See `IO12` parameter). diff --git a/param-docs/parameter-pages/GPIO/LEDType.md b/param-docs/parameter-pages/GPIO/LEDType.md index 1cee7d6..e57e68c 100644 --- a/param-docs/parameter-pages/GPIO/LEDType.md +++ b/param-docs/parameter-pages/GPIO/LEDType.md @@ -1,4 +1,3 @@ # Parameter `LEDType` Default Value: `WS2812` - Type of the `WS2812x` which is connected to GPIO12 (See `IO12` parameter). diff --git a/param-docs/parameter-pages/GPIO/MainTopicMQTT.md b/param-docs/parameter-pages/GPIO/MainTopicMQTT.md index db5b0ca..effc2ce 100644 --- a/param-docs/parameter-pages/GPIO/MainTopicMQTT.md +++ b/param-docs/parameter-pages/GPIO/MainTopicMQTT.md @@ -1,10 +1,6 @@ # Parameter `MainTopicMQTT` Default Value: `wasserzaehler/GPIO` - - !!! Note This parameter is not accessible through the Web Interface Configuration Page! - Please fill me with an explanation and useful links - diff --git a/param-docs/parameter-pages/InfluxDB/Database.md b/param-docs/parameter-pages/InfluxDB/Database.md index 0074b74..267dad9 100644 --- a/param-docs/parameter-pages/InfluxDB/Database.md +++ b/param-docs/parameter-pages/InfluxDB/Database.md @@ -1,4 +1,3 @@ # Parameter `Database` Default Value: `''` - Name of the Database into which to publish the values. diff --git a/param-docs/parameter-pages/InfluxDB/Measurement.md b/param-docs/parameter-pages/InfluxDB/Measurement.md index 9d49750..0f90991 100644 --- a/param-docs/parameter-pages/InfluxDB/Measurement.md +++ b/param-docs/parameter-pages/InfluxDB/Measurement.md @@ -1,4 +1,3 @@ # Parameter `Measurement` Default Value: `undefined` - Name of the Measurement to use to publish the value. diff --git a/param-docs/parameter-pages/InfluxDB/Uri.md b/param-docs/parameter-pages/InfluxDB/Uri.md index e2c2bc4..1cf7cdb 100644 --- a/param-docs/parameter-pages/InfluxDB/Uri.md +++ b/param-docs/parameter-pages/InfluxDB/Uri.md @@ -1,7 +1,5 @@ # Parameter `Uri` Default Value: `undefined` - URI of the HTTP interface to InfluxDB v1, without trailing slash, e.g. `http://192.168.1.1:8086`. - !!! Note Currently only InfluxDB v1 is supported! diff --git a/param-docs/parameter-pages/InfluxDB/password.md b/param-docs/parameter-pages/InfluxDB/password.md index 28965c7..7340bc4 100644 --- a/param-docs/parameter-pages/InfluxDB/password.md +++ b/param-docs/parameter-pages/InfluxDB/password.md @@ -1,7 +1,5 @@ # Parameter `password` Default Value: `undefined` - Password for the InfluxDB v1 authentication. - !!! Note Currently only InfluxDB v1 is supported! diff --git a/param-docs/parameter-pages/InfluxDB/user.md b/param-docs/parameter-pages/InfluxDB/user.md index 7ffc613..6dbc7e6 100644 --- a/param-docs/parameter-pages/InfluxDB/user.md +++ b/param-docs/parameter-pages/InfluxDB/user.md @@ -1,8 +1,5 @@ # Parameter `user` Default Value: `undefined` - Username for the InfluxDB v1 authentication. - !!! Note Currently only InfluxDB v1 is supported! - diff --git a/param-docs/parameter-pages/MQTT/ClientID.md b/param-docs/parameter-pages/MQTT/ClientID.md index ff3ab48..55ea3d8 100644 --- a/param-docs/parameter-pages/MQTT/ClientID.md +++ b/param-docs/parameter-pages/MQTT/ClientID.md @@ -1,6 +1,4 @@ # Parameter `ClientID` Default Value: `watermeter` - ClientID to connect to the MQTT broker. - If disabled, the `hostname` will be used. \ No newline at end of file diff --git a/param-docs/parameter-pages/MQTT/HomeassistantDiscovery.md b/param-docs/parameter-pages/MQTT/HomeassistantDiscovery.md index 6403f0e..b09174e 100644 --- a/param-docs/parameter-pages/MQTT/HomeassistantDiscovery.md +++ b/param-docs/parameter-pages/MQTT/HomeassistantDiscovery.md @@ -1,6 +1,4 @@ # Parameter `HomeassistantDiscovery` Default Value: `true` - Enable or disable the Homeassistant Discovery. - See [here](../Integration-Home-Assistant) for details about the discovery. diff --git a/param-docs/parameter-pages/MQTT/MainTopic.md b/param-docs/parameter-pages/MQTT/MainTopic.md index 43b4532..aa375db 100644 --- a/param-docs/parameter-pages/MQTT/MainTopic.md +++ b/param-docs/parameter-pages/MQTT/MainTopic.md @@ -1,15 +1,10 @@ # Parameter `MainTopic` Default Value: `watermeter` - MQTT main topic, under which the counters are published. The single value will be published with the following key: `MAINTOPIC/NUMBER/RESULT_TOPIC` where: - - `NUMBER` is the name of the value (a meter might have more than one value). The names get defined in the analog and digital ROI configuration (defaults to `main`). - `RESULT_TOPIC` can be one of `value`, `rate`, `timestamp`, `error`, .... - The general connection status can be found in `MAINTOPIC/CONNECTION`. - See [MQTT Result Topics](../MQTT-API#result) for a full list of topics. - diff --git a/param-docs/parameter-pages/MQTT/MeterType.md b/param-docs/parameter-pages/MQTT/MeterType.md index a65bd03..99343e6 100644 --- a/param-docs/parameter-pages/MQTT/MeterType.md +++ b/param-docs/parameter-pages/MQTT/MeterType.md @@ -1,11 +1,8 @@ # Parameter `MeterType` Default Value: `other` - Select the Meter Type so the sensors have the right units in Homeassistant. - !!! Note For `Watermeter` you need to have Homeassistant 2022.11 or newer! - Please also make sure that the selected Meter Type matches the dimension of the value provided by the meter! Eg. if your meter provides `m³`, you need to also set it to `m³`. Alternatively you can set the parameter `DecimalShift` to `3` so the value is converted to `liters`! diff --git a/param-docs/parameter-pages/MQTT/RetainMessages.md b/param-docs/parameter-pages/MQTT/RetainMessages.md index f461381..77a2f01 100644 --- a/param-docs/parameter-pages/MQTT/RetainMessages.md +++ b/param-docs/parameter-pages/MQTT/RetainMessages.md @@ -1,5 +1,3 @@ # Parameter `RetainMessages` Default Value: `true` - Enable or disable the [Retain Flag](https://www.hivemq.com/blog/mqtt-essentials-part-8-retained-messages/) for all MQTT entries. - diff --git a/param-docs/parameter-pages/MQTT/Uri.md b/param-docs/parameter-pages/MQTT/Uri.md index 96e4288..43adc3c 100644 --- a/param-docs/parameter-pages/MQTT/Uri.md +++ b/param-docs/parameter-pages/MQTT/Uri.md @@ -1,4 +1,3 @@ # Parameter `Uri` Default Value: `mqtt://IP-ADRESS:1883` - URI to the MQTT broker including the port. E.g. `mqtt://192.168.1.1:1883`. diff --git a/param-docs/parameter-pages/MQTT/password.md b/param-docs/parameter-pages/MQTT/password.md index 9459cc9..aa3f393 100644 --- a/param-docs/parameter-pages/MQTT/password.md +++ b/param-docs/parameter-pages/MQTT/password.md @@ -1,5 +1,3 @@ # Parameter `password` Default Value: `PASSWORD` - Password for MQTT authentication. - diff --git a/param-docs/parameter-pages/MQTT/user.md b/param-docs/parameter-pages/MQTT/user.md index 7a4230a..cdba2a4 100644 --- a/param-docs/parameter-pages/MQTT/user.md +++ b/param-docs/parameter-pages/MQTT/user.md @@ -1,4 +1,3 @@ # Parameter `user` Default Value: `USERNAME` - Username for MQTT authentication. diff --git a/param-docs/parameter-pages/PostProcessing/AllowNegativeRates.md b/param-docs/parameter-pages/PostProcessing/AllowNegativeRates.md index 4290f8c..68229ad 100644 --- a/param-docs/parameter-pages/PostProcessing/AllowNegativeRates.md +++ b/param-docs/parameter-pages/PostProcessing/AllowNegativeRates.md @@ -1,5 +1,4 @@ # Parameter `AllowNegativeRates` - !!! Warning This parameter is unused! Use [`NUMBER.AllowNegativeRates`](../Parameters/#PostProcessing-NUMBER.AllowNegativeRates) instead! diff --git a/param-docs/parameter-pages/PostProcessing/CheckDigitIncreaseConsistency.md b/param-docs/parameter-pages/PostProcessing/CheckDigitIncreaseConsistency.md index d8963f2..9dbfd1d 100644 --- a/param-docs/parameter-pages/PostProcessing/CheckDigitIncreaseConsistency.md +++ b/param-docs/parameter-pages/PostProcessing/CheckDigitIncreaseConsistency.md @@ -1,9 +1,6 @@ # Parameter `CheckDigitIncreaseConsistency` Default Value: `false` - !!! Warning This is an **Expert Parameter**! Only change it if you understand what it does! - An additional consistency check. It especially improves the zero crossing check between digits. - diff --git a/param-docs/parameter-pages/PostProcessing/ErrorMessage.md b/param-docs/parameter-pages/PostProcessing/ErrorMessage.md index 2213efb..2fdf152 100644 --- a/param-docs/parameter-pages/PostProcessing/ErrorMessage.md +++ b/param-docs/parameter-pages/PostProcessing/ErrorMessage.md @@ -1,8 +1,6 @@ # Parameter `ErrorMessage` Default Value: `true` - !!! Warning This is an **Expert Parameter**! Only change it if you understand what it does! - Do not show error message in return value. In an error case, the last valid number will be used for the various transmission protocols (MQTT, InfluxDB, REST, ...). diff --git a/param-docs/parameter-pages/PostProcessing/NUMBER.AllowNegativeRates.md b/param-docs/parameter-pages/PostProcessing/NUMBER.AllowNegativeRates.md index 3bb7342..825f358 100644 --- a/param-docs/parameter-pages/PostProcessing/NUMBER.AllowNegativeRates.md +++ b/param-docs/parameter-pages/PostProcessing/NUMBER.AllowNegativeRates.md @@ -1,7 +1,5 @@ # Parameter `.AllowNegativeRates` Default Value: `false` - Allow a meter to count backwards (decreasing values). - !!! Note This is unusual (it means there is a negative rate) and not wanted in most cases! diff --git a/param-docs/parameter-pages/PostProcessing/NUMBER.AnalogDigitalTransitionStart.md b/param-docs/parameter-pages/PostProcessing/NUMBER.AnalogDigitalTransitionStart.md index bb21cc8..538c66a 100644 --- a/param-docs/parameter-pages/PostProcessing/NUMBER.AnalogDigitalTransitionStart.md +++ b/param-docs/parameter-pages/PostProcessing/NUMBER.AnalogDigitalTransitionStart.md @@ -1,6 +1,5 @@ # Parameter `.AnalogDigitalTransitionStart` Default Value: `9.2` - This can be used if you have wrong values, but the recognition of the individual ROIs are correct. Look for the start of changing of the first digit and note the analog pointer value behind. Set it here. Only used on combination of digits and analog pointers. diff --git a/param-docs/parameter-pages/PostProcessing/NUMBER.DecimalShift.md b/param-docs/parameter-pages/PostProcessing/NUMBER.DecimalShift.md index 4e15eea..9716f94 100644 --- a/param-docs/parameter-pages/PostProcessing/NUMBER.DecimalShift.md +++ b/param-docs/parameter-pages/PostProcessing/NUMBER.DecimalShift.md @@ -1,5 +1,4 @@ # Parameter `.DecimalShift` Default Value: `0` - Shift the decimal separator (positiv or negativ). Eg. to move from 'm³' to 'liter' (1 m³ equals 1000 liters), you need to set it to +3. diff --git a/param-docs/parameter-pages/PostProcessing/NUMBER.ExtendedResolution.md b/param-docs/parameter-pages/PostProcessing/NUMBER.ExtendedResolution.md index 3689e6f..3d0d74c 100644 --- a/param-docs/parameter-pages/PostProcessing/NUMBER.ExtendedResolution.md +++ b/param-docs/parameter-pages/PostProcessing/NUMBER.ExtendedResolution.md @@ -1,7 +1,5 @@ # Parameter `.ExtendedResolution` Default Value: `false` - Use the decimal place of the last analog counter for increased accuracy. - !!! Note This parameter is only supported on the `*-class*` and `*-const` models! See [Choosing-the-Model](../Choosing-the-Model) for details. diff --git a/param-docs/parameter-pages/PostProcessing/NUMBER.IgnoreLeadingNaN.md b/param-docs/parameter-pages/PostProcessing/NUMBER.IgnoreLeadingNaN.md index 93e96db..a62b0b2 100644 --- a/param-docs/parameter-pages/PostProcessing/NUMBER.IgnoreLeadingNaN.md +++ b/param-docs/parameter-pages/PostProcessing/NUMBER.IgnoreLeadingNaN.md @@ -1,8 +1,5 @@ # Parameter `.IgnoreLeadingNaN` Default Value: `true` - Leading `N`'s will be deleted before further processing. - This is only relevant for models which use `N`! - See [here](../Choosing-the-Model) for details. diff --git a/param-docs/parameter-pages/PostProcessing/NUMBER.MaxRateType.md b/param-docs/parameter-pages/PostProcessing/NUMBER.MaxRateType.md index 45da6ad..89fe510 100644 --- a/param-docs/parameter-pages/PostProcessing/NUMBER.MaxRateType.md +++ b/param-docs/parameter-pages/PostProcessing/NUMBER.MaxRateType.md @@ -1,5 +1,4 @@ # Parameter `.MaxRateType` Default Value: `AbsoluteChange` - Defines if the **Change Rate** compared to the previous value is calculated as absolute change (`AbsoluteChange`) or as rate normalized to the interval (`RateChange` = change/minute). diff --git a/param-docs/parameter-pages/PostProcessing/NUMBER.MaxRateValue.md b/param-docs/parameter-pages/PostProcessing/NUMBER.MaxRateValue.md index f41cab7..553f8f5 100644 --- a/param-docs/parameter-pages/PostProcessing/NUMBER.MaxRateValue.md +++ b/param-docs/parameter-pages/PostProcessing/NUMBER.MaxRateValue.md @@ -1,6 +1,4 @@ # Parameter `.MaxRateValue` Default Value: `0.05` - Maximum change of a reading. - Depending on the settings of `.MaxRateType` it is either treated as `absolute` or `relative`! diff --git a/param-docs/parameter-pages/PostProcessing/PreValueAgeStartup.md b/param-docs/parameter-pages/PostProcessing/PreValueAgeStartup.md index 0c5987b..a58fa86 100644 --- a/param-docs/parameter-pages/PostProcessing/PreValueAgeStartup.md +++ b/param-docs/parameter-pages/PostProcessing/PreValueAgeStartup.md @@ -1,7 +1,5 @@ # Parameter `PreValueAgeStartup` Default Value: `720` - !!! Warning This is an **Expert Parameter**! Only change it if you understand what it does! - Time in minutes, how long a previous read value is valid after reboot. diff --git a/param-docs/parameter-pages/PostProcessing/PreValueUse.md b/param-docs/parameter-pages/PostProcessing/PreValueUse.md index 58f7198..28c08f0 100644 --- a/param-docs/parameter-pages/PostProcessing/PreValueUse.md +++ b/param-docs/parameter-pages/PostProcessing/PreValueUse.md @@ -1,5 +1,4 @@ # Parameter `PreValueUse` Default Value: `true` - Use the previous value (value from previous round) for consistency checks. This also works through a reboot of the device! diff --git a/param-docs/parameter-pages/System/Hostname.md b/param-docs/parameter-pages/System/Hostname.md index 6c435cb..c199809 100644 --- a/param-docs/parameter-pages/System/Hostname.md +++ b/param-docs/parameter-pages/System/Hostname.md @@ -1,8 +1,6 @@ # Parameter `Hostname` Default Value: `undefined` - !!! Warning This is an **Expert Parameter**! Only change it if you understand what it does! - Hostname for the device. It gets automatically transferred to `/wlan.ini` on the SD-Card at next startup. diff --git a/param-docs/parameter-pages/System/RSSIThreshold.md b/param-docs/parameter-pages/System/RSSIThreshold.md index c3cba97..e346c66 100644 --- a/param-docs/parameter-pages/System/RSSIThreshold.md +++ b/param-docs/parameter-pages/System/RSSIThreshold.md @@ -1,6 +1,5 @@ # Parameter `RSSIThreshold` Default Value: `''` - WLAN Mesh Parameter: Threshold for the RSSI value to check for start switching access point in a mesh system. Possible values: `-100` .. `0`, `0` = disabled. It gets automatically transferred to `/wlan.ini` on the SD-Card at next startup. diff --git a/param-docs/parameter-pages/System/SetupMode.md b/param-docs/parameter-pages/System/SetupMode.md index 18fcdaa..b97248e 100644 --- a/param-docs/parameter-pages/System/SetupMode.md +++ b/param-docs/parameter-pages/System/SetupMode.md @@ -1,7 +1,5 @@ # Parameter `SetupMode` Default Value: `true` - !!! Note This parameter is not accessible through the Web Interface Configuration Page! - Set this parameter to `true` to stay in the Setup Mode after the next start of the device. diff --git a/param-docs/parameter-pages/System/TimeServer.md b/param-docs/parameter-pages/System/TimeServer.md index f10713d..ae092a8 100644 --- a/param-docs/parameter-pages/System/TimeServer.md +++ b/param-docs/parameter-pages/System/TimeServer.md @@ -1,9 +1,7 @@ # Parameter `TimeServer` Default Value: `pool.ntp.org` - !!! Warning This is an **Expert Parameter**! Only change it if you understand what it does! - Time server to synchronize system time. If it is disabled or `undefined`, `pool.ntp.org` will be used. You can also set it to the IP of your router. Many routers like Fritzboxes can act as a local NTP server. To disable NTP, you need to activate it but set the TimeServer config to be empty (`""`). diff --git a/param-docs/parameter-pages/System/TimeZone.md b/param-docs/parameter-pages/System/TimeZone.md index fb6dfea..da13cd7 100644 --- a/param-docs/parameter-pages/System/TimeZone.md +++ b/param-docs/parameter-pages/System/TimeZone.md @@ -1,5 +1,4 @@ # Parameter `TimeZone` Default Value: `CET-1CEST,M3.5.0,M10.5.0/3` - Time zone in POSIX syntax (Europe/Berlin = `CET-1CEST,M3.5.0,M10.5.0/3` - incl. daylight saving) Check the table on `http:///timezones.html` to find the settings for your region. diff --git a/param-docs/parameter-pages/TakeImage/Brightness.md b/param-docs/parameter-pages/TakeImage/Brightness.md index 4b259bb..cf9862b 100644 --- a/param-docs/parameter-pages/TakeImage/Brightness.md +++ b/param-docs/parameter-pages/TakeImage/Brightness.md @@ -1,8 +1,6 @@ # Parameter `Brightness` Default Value: `0` - !!! Warning This is an **Expert Parameter**! Only change it if you understand what it does! This parameter can also be set on the Reference Image configuration. - Image Brightness (`-2` .. `2`) diff --git a/param-docs/parameter-pages/TakeImage/Contrast.md b/param-docs/parameter-pages/TakeImage/Contrast.md index f1b358e..8ddbc10 100644 --- a/param-docs/parameter-pages/TakeImage/Contrast.md +++ b/param-docs/parameter-pages/TakeImage/Contrast.md @@ -1,11 +1,8 @@ # Parameter `Contrast` Default Value: `0` - !!! Warning This is an **Expert Parameter**! Only change it if you understand what it does! This parameter can also be set on the Reference Image configuration. - Image Contrast (`-2` .. `2`) - !!! Note Camera driver is not fully supporting this setting yet (no impact on image) diff --git a/param-docs/parameter-pages/TakeImage/Demo.md b/param-docs/parameter-pages/TakeImage/Demo.md index 985b683..cd8f254 100644 --- a/param-docs/parameter-pages/TakeImage/Demo.md +++ b/param-docs/parameter-pages/TakeImage/Demo.md @@ -1,6 +1,5 @@ # Parameter `Demo` Default Value: `false` - Enable to use demo images instead of the real camera images. Make sure to have a `/demo` folder on your SD-Card and it contains the expected files! Check [here](../Demo-Mode) for details. diff --git a/param-docs/parameter-pages/TakeImage/FixedExposure.md b/param-docs/parameter-pages/TakeImage/FixedExposure.md index 57c77db..4b665b8 100644 --- a/param-docs/parameter-pages/TakeImage/FixedExposure.md +++ b/param-docs/parameter-pages/TakeImage/FixedExposure.md @@ -1,9 +1,6 @@ # Parameter `FixedExposure` Default Value: `false` - !!! Warning This is an **Expert Parameter**! Only change it if you understand what it does! - Fixes the illumination setting of camera at the startup and uses this later --> individual round is faster. - diff --git a/param-docs/parameter-pages/TakeImage/ImageQuality.md b/param-docs/parameter-pages/TakeImage/ImageQuality.md index dfbfa3c..b5cb038 100644 --- a/param-docs/parameter-pages/TakeImage/ImageQuality.md +++ b/param-docs/parameter-pages/TakeImage/ImageQuality.md @@ -1,9 +1,7 @@ # Parameter `ImageQuality` Default Value: `12` - !!! Warning This is an **Expert Parameter**! Only change it if you understand what it does! - Quality index for pictures. `0` (high) .. `63` (low) !!! Warning Values below `12` can result in reboots as the image gets larger and might no longer fit in the available RAM! diff --git a/param-docs/parameter-pages/TakeImage/ImageSize.md b/param-docs/parameter-pages/TakeImage/ImageSize.md index 9545336..c2c6f3a 100644 --- a/param-docs/parameter-pages/TakeImage/ImageSize.md +++ b/param-docs/parameter-pages/TakeImage/ImageSize.md @@ -1,11 +1,8 @@ # Parameter `ImageSize` Default Value: `VGA` - !!! Warning This is an **Expert Parameter**! Only change it if you understand what it does! - Size of the camera picture. Available options: - - `VGA` (640 x 480 pixel) - `QVGA` (320 x 240 pixel) diff --git a/param-docs/parameter-pages/TakeImage/LEDIntensity.md b/param-docs/parameter-pages/TakeImage/LEDIntensity.md index 212d1f8..391eba0 100644 --- a/param-docs/parameter-pages/TakeImage/LEDIntensity.md +++ b/param-docs/parameter-pages/TakeImage/LEDIntensity.md @@ -1,8 +1,6 @@ # Parameter `LEDIntensity` Default Value: `50` - !!! Warning This is an **Expert Parameter**! Only change it if you understand what it does! This parameter can also be set on the Reference Image configuration. - Set the Flash LED Intensity. diff --git a/param-docs/parameter-pages/TakeImage/RawImagesLocation.md b/param-docs/parameter-pages/TakeImage/RawImagesLocation.md index ff13ae2..1a3cee1 100644 --- a/param-docs/parameter-pages/TakeImage/RawImagesLocation.md +++ b/param-docs/parameter-pages/TakeImage/RawImagesLocation.md @@ -1,7 +1,5 @@ # Parameter `RawImagesLocation` Default Value: `/log/source` - Location on the SD-Card to store the raw images for logging. - !!! Warning A SD-Card has limited write cycles. Since the device does not do [Wear Leveling](https://en.wikipedia.org/wiki/Wear_leveling), this can wear out your SD-Card! diff --git a/param-docs/parameter-pages/TakeImage/RawImagesRetention.md b/param-docs/parameter-pages/TakeImage/RawImagesRetention.md index 80bbb86..0df0751 100644 --- a/param-docs/parameter-pages/TakeImage/RawImagesRetention.md +++ b/param-docs/parameter-pages/TakeImage/RawImagesRetention.md @@ -1,4 +1,3 @@ # Parameter `RawImagesRetention` Default Value: `15` - Number of days to keep the raw images (`0` = forever) diff --git a/param-docs/parameter-pages/TakeImage/Saturation.md b/param-docs/parameter-pages/TakeImage/Saturation.md index 461164d..f67a451 100644 --- a/param-docs/parameter-pages/TakeImage/Saturation.md +++ b/param-docs/parameter-pages/TakeImage/Saturation.md @@ -1,11 +1,8 @@ # Parameter `Saturation` Default Value: `0` - !!! Warning This is an **Expert Parameter**! Only change it if you understand what it does! This parameter can also be set on the Reference Image configuration. - Image Saturation (`-2` .. `2`) - !!! Note Camera driver is not fully supporting this setting yet (no impact on image)! diff --git a/param-docs/parameter-pages/TakeImage/WaitBeforeTakingPicture.md b/param-docs/parameter-pages/TakeImage/WaitBeforeTakingPicture.md index b4e0827..3f6e368 100644 --- a/param-docs/parameter-pages/TakeImage/WaitBeforeTakingPicture.md +++ b/param-docs/parameter-pages/TakeImage/WaitBeforeTakingPicture.md @@ -1,7 +1,5 @@ # Parameter `WaitBeforeTakingPicture` Default Value: `5` - !!! Warning This is an **Expert Parameter**! Only change it if you understand what it does! - Waiting time between switching illumination on and taking the picture (in seconds)- diff --git a/param-docs/templates/overview.md b/param-docs/templates/overview.md index 33166a0..a8547ce 100644 --- a/param-docs/templates/overview.md +++ b/param-docs/templates/overview.md @@ -1,13 +1,9 @@ # Parameters This page lists all available [Configuration](../Configuration) Parameters. - If a parameter or section has a tick box on its left side, you can disable it. In such case the functionality gets disabled respectively the default values will be used. - !!! Note This is an auto-generated page! See the [README](https://github.com/jomjol/AI-on-the-edge-device-docs/blob/main/README.md) for details! - ## List of all Parameters $TOC -
\ No newline at end of file diff --git a/param-docs/templates/parameter.md b/param-docs/templates/parameter.md index 3da2d66..7ea165f 100644 --- a/param-docs/templates/parameter.md +++ b/param-docs/templates/parameter.md @@ -1,8 +1,5 @@ # Parameter `$NAME` Default Value: `$DEFAULT` - $EXPERT_PARAMETER - $HIDDEN_IN_UI - Please fill me with an explanation and useful links.