Formating

docs/Error-Codes.md

@@ -22,18 +22,18 @@ The firmware failed to allocate enough memory. This most likely is a consequenti
 ## `0x00000004` Cam bad
 The attached camera can not be initialized.
 This usually is because on of the following reasons:
- - The camera is not supported, see [Hardware Compatibility](../Hardware-Compatibility)
- - The camera is not attached properly -> Try to remove and attach it again. Make sure you move the black part enough into the socket!
- - The camera or the camera cable is damaged
+ * The camera is not supported, see [Hardware Compatibility](../Hardware-Compatibility)
+ * The camera is not attached properly -> Try to remove and attach it again. Make sure you move the black part enough into the socket!
+ * The camera or the camera cable is damaged
 
 ## `0x00000008` SD card basic check failed
 One or more basic SD card checks failed.
 
 The following checks are performed during boot sequence:
- - Write a file (sdcard/sdcheck.txt) to SD card with some generic text
- - Read the written file back
- - CRC check
- - Delete the file
+ * Write a file (sdcard/sdcheck.txt) to SD card with some generic text
+ * Read the written file back
+ * CRC verification
+ * Delete the file
 
 Detailed error indication (write, rerad or delete error) can be derived from blinking code of red board status LED. Please have a look to !!!TODO!!!
 
@@ -44,20 +44,20 @@ Oned or more mandatory folders and/or files are missing on SD card.
 To have early indication that SD card is potentially ready for operation, some folder and files, which are mandatory are presence checked. This is not a 100% check and a successful test does not mean everthing is OK.
 
 The following folders / files get checked during boot sequence:
- - /sdcard/config
- - /sdcard/html
- - /sdcard/demo --> created automatically in firmware
- - /sdcard/firmware --> created automatically in firmware
- - /sdcard/img_tmp --> created automatically in firmware
- - /sdcard/log --> created automatically in firmware
- - /sdcard/wlan.ini
- - /sdcard/config/config.ini
- - /sdcard/html/index.html
- - /sdcard/html/ota_page.html
- - /sdcard/html/log.html
- - /sdcard/html/common.js
- - /sdcard/html/gethost.js
- - /sdcard/html/version.txt
+ * /sdcard/config
+ * /sdcard/html
+ * /sdcard/demo --> created automatically in firmware
+ * /sdcard/firmware --> created automatically in firmware
+ * /sdcard/img_tmp --> created automatically in firmware
+ * /sdcard/log --> created automatically in firmware
+ * /sdcard/wlan.ini
+ * /sdcard/config/config.ini
+ * /sdcard/html/index.html
+ * /sdcard/html/ota_page.html
+ * /sdcard/html/log.html
+ * /sdcard/html/common.js
+ * /sdcard/html/gethost.js
+ * /sdcard/html/version.txt
 
 Recommendation: Check logs and / or redo a Over-The-Air Update (OTA Update) to ensure proper SD card structure